ESR6670 Changelog

Release Date Oct 05, 2009

WEB version: 1.0.9

Firmware upgrade:

l          ESR-6670-APPS-V1-0-9-86.dlf

l          ESR-6670-KNL-V1-0-9-137.dlf

MD5 Checksum:

l          APPS : 811513A04A3BEA8671C2FFABA75F9100

l          KNL : 7D8FFCF638800A0A0FB1CACDD6933B5C

New Features

l          Support L2TP function.

Problems Resolved:

l          Fix Ralink date code issue: Use RT3050F/RT3052F new Date Code make throughput abnormal.

l          Fix LED issue:
(1) Power/Status LED: It won't blink until press reset button over 15 secs.
(2) WLAN LED: Enabled WPS function and then press WPS button, the WLAN LED won't blink during link progress.
(3) Internet LED:
        Step 1: Using Dynamic IP in WAN. Connected to a DHCP server in WAN port, after got IP from DHCP server, the Internet LED will always on.
        Step 2: Change WAN port to connect a non-DHCP server (ex. PPPoE server), DUT's WAN will not get IP and the Internet LED will blink.
        Step 3: Change WAN port to connect a DHCP server, DUT's WAN will get IP from DHCP server, but the Internet LED still blink.

l          Fix LAN IP address issue: UI issue: It allows setting 255.255.255.666 in IP Subnet Mask field. And after apply; user cannot access DUT's WEB UI any more. Has to restore to default.

l          Repeater issue: If connect to an AP which the security is set to WPA and special character (;), DUT's UI shows connected successfully, but it fail to connect that AP in fact.

l          Static Routing issue: UI issue: It allows adding a rule which is the same subnet with DUT's LAN IP. After apply, a PC in LAN side cannot connect to DUT's WEB UI. Has to restore to default.

l          Fixed Wizard issue:
- -Set the wireless security as WEP128 in wizard, but it becomes WEP64 after reboot.
-- Run the Setup Wizard. When DUT has detected the DHCP server, UI will link to a page with null Hostname and Mac.  Entering Hostname and leaving the Mac empty then click "Next" button, a Warning message pops "Mac Address Error".  This is not convenient for users.
-- As above, the Wizard still contains ISP list.

Change:

l          3G auto connection functions: It depends on the 3G dongle. If the 3G dongle use HSO driver will display auto setting.

Support Dongle:

l          E169G

l          E170

l          E172

l          E176

l          E180

l          E220

l          E270

l          E272

l          E1750

l          Vodafone K3565

l          C100S

l          C120

l          C270

l          Aircard 888U (Aircard 888)

l          Compass 596

l          ICON 225 (GIO 225)

l          GlobeSurfer iCON 7.2

l          Ovation MC950D

l          U760

l          MU-Q101

l          MD300

l          MF626

l          Vodafone K3565-Z

l          Vodafone K3520-Z

l          MF627

l          T500

l          82D

l          PHS100

 

Release Date Jul 13, 2009

WEB version: 1.0.8

Firmware upgrade:

l          ESR-6670-APPS-V1-0-8-79.dlf

l          ESR-6670-KNL-V1-0-8-123.dlf

MD5 Checksum:

l          APPS : 8FD487196631C31EC6174BE98B54B809

l          KNL : CB61C71812B3CF2C38BD8E1F9622DD47

New Features

l          3G USB Driver : Support Huawei E1750 device

Problems Resolved:

l          Fixed the 3G connect issue: Using 3G to connect with Internet, DUT will become abnormal. One of following phenomenon will come,
a. UI shows the Internet connection is broken, but in fact it’s not. In the meantime, users could not do anything on DUT through UI, including re-connecting to Internet. The only way to recover DUT is power off/on it.
b. UI shows the Internet connection is broken, and in fact it is. In the meantime, users can do something on DUT through UI but couldn’t connect to Internet again anymore. The only way to recover DUT is power off/on it.

l          Fixed Default Gateway display in 3G connect issue: The Default Gateway IP of WAN port is still 10.64.64.64.

l          Fixed PPTP SYN packet issue: 1. When DUT in PPTP-Static mode, DUT will send SYN packet to its "Gateway IP Address", not "Service IP Address". It should route packets through "Gateway IP Addres" and destined to "Service IP Addres". This issue doesn't happen in PPTP-DHCP mode. Double check behavior with D-Link_DIR-655. (By ECB9300 issue 2.5.4.5 )

l          Fixed URL Filter issue: Enter a rule with string "http", the DUT will hang up.

l          Fixed PPTP issue: If WAN type from PPPoE change to PPTP then isn't establish connection. (By ESR9850 issue list)

Change:

l          Support DNS server assign function in Internet/Dynamic IP page.

l          Support WPS manual control function in Wireless/WPS page.

 

Release Date Jun 11, 2009

WEB version: 1.0.8

Firmware upgrade:

l          ESR-6670-APPS-V1-0-8-72.dlf

l          ESR-6670-KNL-V1-0-8-108.dlf

MD5 Checksum:

l          APPS : BE95B639F1F221F6BC3A7B602D919258

l          KNL : 50AD56E7F1901D15D6644F3A04237545

New Features

l          N/A

Problems Resolved:

l          Modify Bandwidth Allocation UI issue:  for IE browser, if we press the "Reset" button, the form of Rate will be blank, then we set "Local IP range" and "Port range” and apply, it will be fail. And for Opera, Safari and Firefox browser, if we press the "Reset" button, the form of Rate will not to reset.

l          Fixed WEB Content issue: 1. Set 63 ' as WPA2-AES key then apply. The webpage Wireless->Security and Wireless->WPS couldn't be opened. The only way is factory default DUT. Some other special ASCII keys, such as \ and ", can cause the same problem.

Change:

l          Modify UI : remove DDNS、Remote management、WAN Monitor 、power saving and schedule function in AP Repeater mode.

l          Modify UI: remove ISP select and “Connect/Disconnect" buttons in Internet-> 3G pages..

 

Release Date May 18, 2009

WEB version: 1.0.7

Firmware upgrade:

l          ESR-6670-APPS-V1-0-7-69.dlf

l          ESR-6670-KNL-V1-0-7-102.dlf

MD5 Checksum:

l          APPS : A4BF446B33FD784CEB48A741DA1B075A

l          KNL : 1BDA47DAF0B5D1B596B5BC415C39CE5B

New Features

l          3G USB Driver : Support Option iCON 7.2 device

Problems Resolved:

l          Fixed Wireless issue: While the wireless channel is set at channel 12 or 13, in fact DUT is using channel 1.

Change:

l          N/A

 

Release Date May 05, 2009

WEB version: 1.0.7

Firmware upgrade:

l          ESR-6670-APPS-V1-0-7-67.dlf

l          ESR-6670-KNL-V1-0-7-100.dlf

MD5 Checksum:

l          APPS : 4AAB432DE9FB70846C03E745808AD7D2

l          KNL : EA98968443853A7F0E2C425F932BAC43

New Features

l          N/A

Problems Resolved:

l          Fixed 3G GUI issue: In the "Internet->3G" webpage, although the connection type is "Keep Connection", the Idle Time is still changeable. (by SQA ESR6650 issue)

l          Fixed 3G GUI issue: The warning message window about "Plug/Remove USB device will reboot NAT" has two unnecessary characters “/n”. (by SQA ESR6650 issue)

l          Fixed Clone MAC issue: Once the “Clone MAC” is used, then the cloned MAC will follow DUT forever until an user to Factory Default it, or clone another MAC to instead. (by SQA ESR6650 issue)

l          Fixed 3G connection issue: Set the 3G connection type as "Automatic Connection", and DUT will get the same IP addresses of IP, Default Gateway, and DNS. So it's impossible for users to access Internet. (by SQA ESR6650 issue)

Change:

l          Update 3G management tool.

 

Release Date Feb 11, 2009

WEB version: 1.0.5

Firmware upgrade order:

l          ESR-6670-APPS-V1-0-5-58.dlf

l          ESR-6670-KNL-V1-0-5-88.dlf

 

<First Release>

Request from customer:

l          Model name change. <ESR6670>